Description
OMRON TL-W1R5MC1 INDUCTIVE PROXIMITY SENSOR SENSOR INPUT:INDUCTIVE SENSING RANGE:1.5MM SUPPLY VOLTAGE RANGE DC:10V TO 30V CONTACT CURRENT MAX:100MA SWITCH TERMINAL
TL-W Standard Flat Inductive Sensors
The TL-W series are standard flat inductive proximity sensors. These sensors are only 6 mm thick yet provide a sensing distance of up to 5mm.
Features and benefits
Pre wired models with 2m cable
Heat resistant ABS casing
Protection circuit: load short circuit protection, surge suppressor
Temperature range -25 → 70 °C
IP67 ingress protection
Specifications
| Spec | Value |
|---|---|
| Body Style | Block |
| Output Type | NPN-NO |
| Detection Range | 1.5 mm |
| Terminal Type | Cable |
| Supply Voltage | 12 → 24 V dc |
| Length | 25mm |
| Width | 8mm |
| Depth | 5.5mm |
| Maximum DC Voltage | 30V |
| Mounting Type | Non Flush |
| IP Rating | IP67 |
| Switching Current | 100 mA |
| Housing Material | ABS |
| Shielding | Unshielded |
| Reverse Polarity Protection | Yes |
| Maximum Switching Frequency | 1kHz |
| Minimum Operating Temperature | -25°C |
| Maximum Operating Temperature | +70°C |
** S1 - Our S1 designated products are new parts, never used, in original manufacturer packaging and may be an older date code, firmware, series or style. When purchasing S1 products, please verify series and firmware if applicable. All units will have been tested when required and consequently may not carry the original factory seal.
![HTML5 Icon](https://cdn11.bigcommerce.com/s-skehis85to/product_images/uploaded_images/18-months-warranty.png?t=1540653600&_ga=2.228752671.247704530.1543716259-1969445514.1537879509")
