EK1100 - New (S2), See Description

BECKHOFF EK1100 | EtherCAT Coupler

The EK1100 coupler connects EtherCAT with the EtherCAT Terminals (ELxxxx). One station consists of an EK1100 coupler, any number of EtherCAT Terminals and a bus end terminal. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation.

The coupler is connected to the network via the upper Ethernet interface. The lower RJ45 socket may be used to connect further EtherCAT devices in the same strand. In the EtherCAT network, the EK1100 coupler can be installed anywhere in the Ethernet signal transfer section (100BASE-TX) – except directly at the switch. The couplers EK9000 and EK1000 are suitable for installation at the switch

S2 - All S2 designated products are new, never used items that will have been repackaged in Service-Asia or custom packaging. These surplus items may not come with manuals or other accessories that would normally be supplied when buying factory new and may be older date codes, firmware, series or style. When purchasing S2 products, please verify series or firmware if applicable. Units will be tested prior to dispatch where necessary